Posted on

How to Clean Keyboard Keycaps

You can easily clean your keyboard’s keycaps by soaking them in isopropyl alcohol. This solution is effective at killing bacteria, but you must be careful not to get the solution on the actual switch. To ensure that you don’t damage your keyboard, you should use cotton swabs that do not have any fray or wrinkles. Afterwards, wipe the keys thoroughly with a microfiber cloth.

When cleaning keyboard keycaps, you can do so with water. Soapy water will help disinfect the keycaps and soften the skin layer. It will not harm the keyboard’s electronics. Make sure to dry the keyboard completely before using it again. To remove the dust, you can flip the keyboard over to wipe off the keys. Alternatively, you can remove the keycaps by turning the computer upside down and applying compressed air to them.

Before you start cleaning the keys, you should take a picture of the keycaps. If you cannot find the keycaps in the user manual, you can use a toothpick or a straightened paper clip. To clean the keycaps, you can dampen a cotton swab in isopropyl alcohol. After wiping the keyboard, you should wipe the surface of the board with a cloth soaked in water. If you’re unable to get the dust out, you can try using a toothpick.

Before you begin cleaning the keyboard, you must take a photo of the keycaps. Alternatively, keep the user manual with the keycap image handy. Now, take the keys out of the keyboard and place them in the washing bowl. Next, you need to use a paper clip or credit card to pop the keycaps out. It is best to do this while the computer is unplugged. If you want to clean your keyboard, you should unplug the keyboard before cleaning it. You can damage its USB port or board if you do so.

If you cannot use the keycaps, you should use a microfiber cloth instead. It is best to wipe the keys with a damp cloth, as paper can leave particles. Then, wipe the keycaps with compressed air. Do not forget to turn off your computer. Do not tilt the keyboard when cleaning the keycaps. You should disconnect the keyboard from the computer to avoid damaging the switches. If you do, you can then remove the dirty keys.

To clean keyboard keycaps after a spill, you should remove the keycaps first. Then, you should clean the inside of the keyboard using a damp microfiber cloth. Do not wipe the keys with a strong liquid, as it can scratch the surface. If you don’t want to get the keyboard wet, you should use a dry cloth. This way, you can easily wipe the keyboard without causing damage to the plastic parts.